2.54mm Right Angle Female Header Dual Row Pin Connector Three
Plastic
Specifications:
| Products Name | Female Header/PCB Connector |
| Pitch | 2.54mm(0.1'') |
| Current Rating | 3.0 AMP |
| Contact Resistance | 30 mΩ Max |
| Withstand Voltage | 500 V AC/DC |
| Insulation Resistance | 1000 MΩ Min |
| Operation Temperature | -40℃ to 105℃ |
| Contact Material | Coppy Alloy |
| Contact Plating | Au or Sn Over Ni |
| Insulator Material | PA6T+30 GF(UL94-V0) |
| Mounting Type | Through Hole |
| Termination | Solder |
| Number of Row | Dual |
| Plastic Height | 8.5 mm |
| Contact Finish | Gold Flash |
| Pins available | 2 Pins to 80 Pins |
| Color | Black |
| Packaging | Tube |
Description
1. Female header connector is a kind of connector.
2. Its function is to act as a bridge between the blocked or
isolated circuits, and to take on the task of current or signal
transmission.
3. It is used together with the pin header to form the board to
board connection; or it is used together with the electron beam end
to form the board to line connection; it can also be used
independently for the board to board connection.
Category
1. According to the spacing: 0.8mm, 1.0mm, 1.27mm, 2.0mm, 2.54mm.
2. According to whether it has convex points, the convex points are
divided into half convex and full convex.
3. According to the number of rows: single row, double row, three
row, four row, etc. at present, there are only four rows at most.
4. According to the installation mode, 180 degrees are represented
by s, 90 degrees by W, and SMT by T.
5. According to whether it needs to be increased or not, whether it
needs to be divided with positioning columns, there are two kinds
of positioning columns, one is the internal positioning column and
the other is the ear positioning column.
6. According to the terminal division: Y-type terminal (generally
used for plastic height), U-type terminal (generally used for
plastic height), four side ring bonding terminal.
FAQ
Q: Can I get some samples?
A: Yes,some samples are free.
Q. If happend with the defective products when receiving the goods,
how to deal with?
1. Next to impossible of the goods will be not good as before the
shipping, we have many chekings to confirm the products is no
problem. Then if happened, RealRun will bear all the
responsibility.
2. First: why this will be happen, how happen, and how to control
in the future, a table will be come out for your checking.
3. Second: discuss the solutions.
4. Finally: RealRun will bear all the fees if returning and
changing the goods or the loss caused.
Q. which payment can be accepted:
A: 1. The payment terms can be flexiable depend on the quantity and
products.
2. Usually, new customer we prefer the 100% T/T before shipping or
30%T/T advance before shipping.
Q: Can I get some samples?
A: Yes, sample order is available for quality check and market
test.
Q: What’s the delivery time?
A: It usually takes about 3~7 working days to produce the products.
